2 items
  • LX300W
  • LX300W
  • LX300W
  • Compare


76cm (29.8") COLOR LCD MONITOR
The 29.8-inch 4 megapixel monitor in widescreen format is designed for use in operating rooms (interventional radiology, cardiology, or surgery). It is a value for money solution for smaller examination and operating rooms where individual monitors increasingly are being replaced by large-format screens capable of displaying multiple image sources simultaneously.
Model RRP (Excl. VAT)
78 000,00 SEK

Quick Brightness Stabilization for Instant Viewing

EIZO’s fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.


Diagnostic Precision with Factory Adjustment

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to offer monitors fully compliant with DICOM Part 14.


Brightness Uniformity for a Steadier Image Across the Screen

The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors, especially with larger screen sizes.


Controlled Cooling

The monitor features intelligent cooling concept by measuring and controlling the inside temperature. A mode without fan cooling is selectable so the controlled laminar airflow will be undisturbed within the room as far as possible.



Arm Mountable VESA Compliance

VESA compliance to be attached to existing mounting accessories.

Customer Assurance with Medical Standards

EIZO monitors meet the strictest medical, safety, and EMC emission standards.

Wide Viewing Angles for Multiple People Use

Thanks to the wide viewing angles, images can be viewed simultaneously by several people with the highest quality reproduction and minimal color shift.


Consistency with DICOM Part 14 Calibration

RadiForce monitors are calibrated to comply with DICOM Part 14 to offer rendering consistency over time.


Everything in a Single Glance

Large widescreen monitors with high resolution can be used instead of single 1 Megapixel monitors in ceiling suspensions. Compared with multi-monitor scenarios, these large screen monitors have no regional color differences or obtrusive bezels, thus reducing eye fatigue and the potential for distraction.



Fail-Safe Function

Special fail-safe mode through DVI input for emergency information from the system for a certain timing. As soon as the timing is active, the information will be shown immediately on the upper left screen side.

Fail-Safe Function

Environmentally-Friendly LED Backlight

By utilizing an energy-efficient LED as a backlight, the monitor achieves a high-brightness and low power consumption at the same time. Unlike conventional CCFL backlights, LED backlights deteriorate more slowly and thus the monitor offers a longer service life. Since the LED backlight is mercury free, it will reduce any potential impact on the environment when it is disposed of.

LCD Panel Protector for Easy Cleaning

Panel protector is pre-attached to the monitor during production or offered as an option to protect against dust and scratches. Clean lines and smooth surfaces also allow easy cleaning and disinfecting.


Model variations
Cabinet color Black
Type Color TFT LCD Panel (IPS)
Backlight LED
Size 76 cm / 29.8" (756 mm diagonal)
Native resolution 2560 x 1600 (16:10 aspect ratio)
Viewable image size (H x V) 641.0 x 401.0 mm
Pixel pitch 0.2505 x 0.2505 mm
Pixel density
Grayscale tones
Display colors 10-bit colors (DisplayPort): 1.07 billion (maximum) colors 8-bit colors: 16.77 million colors
Viewing angles (H / V, typical) 170°, 170°
Brightness (typical) 750 cd/m²
Recommended brightness for calibration
Contrast ratio (typical) 1100:1
Response time (typical) 20 ms (On/Off)
Wide gamut coverage (typical)
Video signals
Input terminals DVI Dual Link x 1, DVI Single Link x 1, HDMI (DVI-Signal) x 1, DisplayPort x 1
Output terminals (loop through)
Digital scanning frequency (H / V) 31 - 100 kHz / 29.5 - 61 Hz, Frame synchronous mode: 59.5 - 60.5 Hz
Analog scanning frequency (H / V)
Sync formats
Wired LAN
Function 1 upstream, 2 downstream
Standard USB 2.0
Input terminals
Output terminals
Sound adjustment
Power requirements AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
Maximum power consumption 150 W
Typical power consumption
Power save mode Less than 20 W
Standby mode
Power management DVI DMPM, DisplayPort 1.1a
Sensor Backlight Sensor
Features & functions
Preset modes
Auto EcoView / BrightRegulator
EcoView Sense
Brightness Stabilization
Digital Uniformity Equalizer Yes
OSD Languages English, German
Communication Protocol
Physical specifications
Dimensions (Landscape, W x H x D)
Dimensions (Without stand, W x H x D)
Dimensions (Panel mount, W x H x D)
Net weight
Net weight (Without stand) 15.5 kg +/- 1 kg
Net weight (With hood)
Net weight (Panel mount)
Height adjustment range
Hole spacing (VESA standard) 200 x 100 mm and 100 x 100 mm, M4, depth 8 - 11 mm
Environmental requirements
Operating temperature
Operating humidity (R.H., non condensing)
Degree of protection IP20
Certifications & standards CE (Medical Device Directive), IEC/EN60601-1 (2nd edition), IEC/EN60601-1 (3rd edition), CAN/CSA C22.2 No. 601.1-M90, CAN/CSA C22.2 No. 60601-1-08, UL60601-1, FCC-B, C-tick, RCM (from March 1st 2016 latest), RoHS, China RoHS, WEEE, CCC
FDA 510(k) clearance
Supplied accessories AC power cord (eu, us, jp, LX300W-S only), dual link signal cable (DVI-D - DVI-D, LX300W-S only), Utility Disk (PDF Instructions for Use)


Available: 25

RRP(Excl. VAT): 156,00 SEK

  • Eizo Library
    Eizo Library
  • Case Studies
    Case Studies
  • Videos
  • Award&Reviews